Page 52
J-400 Series
A. To access the Interior solid Color mode:
1. Press button A to activate the solid color mode.
note: The default color and intensity will always be the last color and
intensity used.
2. Press again to turn off.
3. Press either the Left or Right button of the Navigational Quad Keypad to
scroll through or select one of the 7 different colors (Figure C).
Press the Left button to move forward in the color sequence. (Blue-•
Cyan-Green-Yellow-Orange-Red-Purple-Blue).
Press the Right button to move backwards in the color sequence. (Blue-•
Purple-Red-Orange-Yellow-Green-Cyan-Blue).
4. The intensity of the lights can be controlled
in both the solid color or light rotation modes
by using the Navigational Quad Keypad
(Figure D).
Press the Up button to increase the intensity •
in 25% increments.
Press the Down button to decrease the intensity in 25% increments.•
note: The intensity range is from 25% to 100%, in increments of 25%. As
the intensity is increased/decreased the bulb will darken/lighten to reect
the effect. Intensity defaults to the last setting used.
B. To access the Interior light
rotation mode
The lighting performance can be user
enhanced by controlling the intensity
and frequency effects as follows:
1. Press button C to enter the Light
Rotation Mode (Figure E).
2. To control the speed of the light
rotation use the Navigational
Quad Keypad by pressing the
Right button to increase the
speed of the light rotation speed from 1, 2, 3, 4, 5 or 6
(60, 33, 18, 10, 5 or 3 seconds respectively) or press the
Left button to decrease the speed of the light rotation from 6, 5, 4, 3,
2 or 1 (3, 5, 10, 18, 33 or 60 seconds respectively). On the LCD
display you will see a number from 1-6 to indicate the speed selec-
tion (Figure F).
Blue Cyan
Green
Yellow
Orange
RedPurple
Figure C
25% 50% 75% 100%
Figure D
ROTATION
Brightness
Displays
Speed
Information
Figure E
Figure F
1 2 3 4 5 6
(60 sec) (33 sec) (18 sec) (10 sec) (5 sec) (3 sec)