Jacuzzi J - 400

Page 89

J-400 Series

19.8 Generic mP3 Player Operation

1. Connecting Your mP3 Player

A. Plug in any MP3 player’s

headphone output jack

with supplied cable into the

auxiliary port (11) using the

supplied audio RCA cable.

Close stereo compartment

during use to prevent

moisture from entering the

compartment.

2. setting up The mP3

Player for use

A. Select preferred song/album/

playlist prior to plugging in

MP3 player and start playback.

B. Press “Mode Button” on stereo receiver until the LCD display

reads “auX”.

note: All external MP3 player playback operations are performed solely

by the MP3 Player with the exception of volume control and “Mode

Button” selector, which can be controlled via wireless remote or on the

stereo receiver.

warnInG: rIsK OF eleCTrICal sHOCK HaZarD

eXIsTs anD eQuIPmenT DamaGe! Never connect, dis-

connect or operate external MP3 player while hands are wet

or while sitting or standing partially or fully immersed in water!

19.9 J-1000 audio system stereo Troubleshooting

1. unit will not turn-on

Make sure spa power is turned on, then

check both harness fuses on side of unit

making sure they are the proper ratings:

Yellow memory B+ line (10A fuse).•

When faced with a malfunction during •

operation, push BND button (8) and Eject

button (13) at the same time to reset

software.

With spa power off, use a paperclip to •

press the reset button located besides the USB Docking Station (10)

to do a hardware reset.

note: It will be necessary to re-enter the radio preset memories and

other personal settings after performing a reset. After resetting player,

always ensure all functions are operation correctly.

217 3

USB