Page 55
J-400 Series
12.0 Programming Instructions for settings 1 menus
Your Jacuzzi spa is equipped with two settings menus that allow you to
program and activate different components of the spa. In the “Settings
1” menu you can program the Language, Date and Time, and the check/
clean lter reminder. You can also enter the “Settings 2” menu (Section
13.0, page 59).
12.1 To access the settings 1 menu:
1. Press button D from the Main Menu (page 35) to enter the Settings 1
Menu (Figure A).
2. From this menu you can choose a language (either English
or Français), set the time and date, set the change/clean lter
remainder and see the on or off status for the ozone (if equipped, the
ozone is not programmable).
12.2 Choosing the language
1. Press button A to enter the
Language submenu. The screen will
change to the Figure B.
note: English is the default language.
2. Use the Navigational Quad Keypad
to switch between English and
Français by pressing the Up or Down button.
3. Press the Splash button to save your change. The screen will return
to the Settings 1 Main Menu.
D
C
B
A
Press to
set filter timer

Language

Ozone

Filter

OFF
ENG
543
SETTINGS 1
Figure A
Figure B
543
LANGUAGE
Select
English ENG
Français FRA
English ENG
FRA
Press to save