2-12 Controls and operation

Cassette tape player operation

The audio display will indicate which
function has been selected.
Messagesinclude:
When loaded, a tape immediately plays
and after playing one side, auto-reverses
and plays the other. Equalisation of
non-ferric tapes is automatically adjusted.
Eject and tape-in indicator
When a cassette is inserted, the aperture
door closes and a cassette icon is
displayed. Press to eject the cassette.
TAPE button
If you are playing the radio or
CD changer, pressing TAPE will play any
cassette in the player. This function can
also be controlled by a button on the
steering wheel (see page 2-1).
Change tape side
While playing a cassette, press the
TAPEb utton to change to the other side
of the tape. This function can also be
controlled by a button on the steering
wheel (seepage 2 -1).
Fast forward and rewind
These controls have two functions,
to seek a track, and tape fast forward or
rewind. Momentarily pressing the right-
hand button will locate the beginning of
the next track. Similarly pressing the left-
hand button, will return to the beginning
of the curr ent track. Pressing and holdi ng
the appropriate button for two seconds
will activate continuous fast forward or
rewind of the tape. This can be cancelled
by pressing either button again.
Dolby B
When using a cassette with a ‘Dolby’
recor ding , the n oise redu ctio n sys tem c an
be selected by pressing the DOLBY on/off
button. DOLBYwill be displayed to
indicate the system is active.
Dolby noise reduction system is
manufactured under licence from
Dolby Laboratories Licensing
Corporation. ‘Dolby’ and the double-D
symbol are trade-marks of
Dolby Licensing Corp.
SIDE1UP1 Locate beginning of next
track on side1.
SIDE1DN1 Locate beginning of track
being played on side 1.
SIDE1REW Rewind.
SIDE1FF Fast forward.
LOADING Loading tape.
TAPE EJECT Ejecting tape.
TAPE CLEAN Tape mechanism
requires cleaning.