Controls and operation 2-3
DSP Setting Seating Positions
With a mode selected, adjust the volume control knob to the desired level.
After approximately five seconds the audio system will return to normal volume control mode.
Digital Signal Processing – DSP
DSP facilitates optimisation of sound for specific seating positions. To optimise sound for all seating positions:
1.Repeatedly press the MODE button until POS ALL is displayed.
2.Rotate the volume control knob to cycle through POS
POS REAR, and POS FRONT until the desired setting is achieved.
Following approximately five seconds of no further actions or adjustments, the audio system will return to the previous display.
Mode level 2
Press and hold MODE button until TA VOLUME is displayed, then repeatedly press and release to scroll to the following displays as required:
•VOICE (adjust Voice Activation volume).
•VOICE TRAIN A.
•VOICE TRAIN B.
•CLOCK SET.
Press and hold MODE button to exit.
Setting the audio display clock
1.Press and hold the MODE button until TA VOLUME is displayed.
2.Repeatedly press and release the MODE button until CLOCK SET is displayed.
3.While the hour format is flashing, use the seek up/seek down keys to select either 12 or 24 hour format.
4.Press and release the MODE button.
5.If the 12 hour format has been selected, use the # key to select AM or PM as appropriate.
6.Using the keypad, enter the correct time. It should be noted that clock time must be entered as four digits e.g. 0325 or 1525, when in 12 or 24 hour format.
7.To exit clock setting procedure, press and hold the MODE key until the display reverts to audio mode.
