Controls and operation 2-5
If stations cannot be located for all preset positions, those that are found will be allocated positions commencing with number 1, leaving the remainder not programmed. The display will show NO FM or NO AM if unprogrammed presets are selected.
To switch between the A MEM preset stations and your own presets, press and immediately release the A MEM button.
A MEM with radio broadcast data system (RBDS) selected
If the A MEM function is operated while in RBDS mode, the radio will be muted briefly, while a search is made for the nine strongest RBDS stations.
Radio broadcast data system (RBDS)
Jaguar sound systems are equipped with Radio Broadcast Data System (RBDS). When tuned to certain stations on the FM waveband, the radio decodes signals transmitted, to provide the following functions (dependent upon the service available).
•RBDS station name display:
When RBDS is selected the station name is displayed in eight characters.
•RBDS Station/Programme type display and search:
RBDS displays information on the type of material broadcast by the station or programme that is on i.e. News, Classical, Rock etc. In addition to this function, the radio can search for a selected programme type.
•RBDS Priority programme type auto
RBDS operation
To activate RBDS, press the TA button and hold for at least two seconds until RBDS ON is displayed.
To
With the radio tuned to an RBDS station and RBDS activated, the radio gathers RBDS information and displays the service name/data.
If the radio is not tuned to an RBDS station, it will remain on that station and display the frequency, and RBDS will remain on in readiness for a signal.
When RBDS data is lost the radio will stay on station, the display shows the frequency only and RBDS remains on in readiness for the signal to recover.
If the RBDS function does not respond correctly, see RBDS
