JAI operation manual Specification table, CV-M91P

CV-M91

9.2. Specification table

Specifications	CV-M91P			CV-M91N
Scanning system	CCIR PAL, 25 frames/sec.			EIA NTSC. 30 frames/sec.
	625 lines, 2:1 Interlaced			525 lines, 2:1 Interlaced
Frame rate	50 Hz			59.94 Hz
Line frequency	15.625 kHz			15.734 kHz
Pixel frequency	14.25 MHz			14.349949 MHz
CCD sensors	3 x 1/3” monochrome IT CCD			3 x 1/3” monochrome IT CCD
	ICX-409AL-6			ICX-408AL-6
Sensing area		4.8 (h) x	3.6 (v) mm
Effective pixels	752 (h) x 582 (v)			768 (h) x 494 (v)
Pixels in video output	744 (h) x 575 (v)			765 (h) x 486 (v)
Cell size	6.5 (h) x 6.25 (v) ∝m			6.35 (h) x 7.4 (v) ∝m
Resolution horizontal		570 TV lines
Sensitivity (on sensor)	0.5 Lux, Max gain, 50% video
S/N ratio	54 dB			56 dB
Video outputs. (DC coupled)	RGB			RGB
	Y/C PAL			Y/C NTSC
	VBS PAL			VBS NTSC
Video output level	RGB and C signal, 0.7 Vpp, 75 Ω
	G on sync, Y signal and Composite VS, 1.0 Vpp, 75 Ω
Gamma		1.0 - 0.45
Gain		Manual – Automatic
Gain range		0 to +18 dB
Accumulation		Field – Frame
Synchronization	Int. X-tal. Ext HD/VD or random trigger
Scanning	2:1 interlaced, non-interlaced
Composite VS input	1.0 Vpp ±0.3V. 75 Ω terminated
Composite sync output		4 Vpp from 75 Ω source
HD/VD sync input	4 Vpp	±2 V. (Termination TTL or 75 Ω)
HD/VD sync output		4 Vpp from 75 Ω source
Trigger input	4 Vpp	±2 V. (Termination TTL or 75 Ω)
WEN output (write enable)		4 Vpp from 75 Ω source
EEN output (exposure enable)		4 Vpp from 75 Ω source
Pixel clock output		4 Vpp from 75 Ω source
Shutter.
Continuous and Edge pre-select	(off), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec.
Pulse width control input		1 H to 900 H
Start/stop		1/10,000 to 1/77 second
Long time exposure		1 field to ∞
White balance	Manual, one push (2350 to 6400 K)
Functions controlled by	Trigger mode, Shutter speed, Accumulation, Interlace, AGC level, White clip,
RS 232C	Set-up, Manual gain, AGC/manual gain, Internal/ potentiometer gain set,
		Gamma, white balance.
Functions controlled by internal DIP	VD input/output, HD input/output
switches	HD, VD and Trigger 75 Ω termination on/off
Operating temperature		-5°C to +45°C.
Humidity		20 - 80% non-condensing
Storage temp./humidity	-25°C to 60°C./20% - 90 % non-condensing
Vibration		3 G (15 Hz – 200 Hz in XYZ)
Shock		50 G
Regulations	CE (EN 50081-1, EN 50082-1) FCC part 15
Power		12V DC ± 10%. 6 W
Lens mount	C-mount. (Max 4.0 mm thread)
Dimensions		50 x 60 x 130 mm		(HxWxD)
Weight		480 g

- 24 -