142
b Remove the hoop from the carriag e and remove the
fabric from the hoop.
Place the template sheet on the fabric.
Align the marking po ints of the sewn pattern and
template sheet.
NOTE:
Ifsemi-opaquepaperisnotavailable,printthe
template sheet on plain paper and cut the left side
at the marking points (along the broken line in the
illustration).
n Mark the end points of the ver tical centerline for the
second pattern.
t Marking points
y Vertical centerline
Border Designs
Border design patterns SQ14-145 to SQ14-146 can be
accurately connected to each other with the built-in
marking points.
Example: Connecting border design patterns SQ14-145
and SQ14-146 .
z Print template sheets on semi-opaque paper for
border design patterns SQ14-145 and SQ14-146 by
using Horizon Link Suite.
q Template sheet
x Place the template sheet on the fabric an d mark the
end points of the centerlines with tailor’s chalk. Draw
centerlines on the fabric.
The horizontal line should be l ong enough to connect
the next patterns.
w Centerlines
c Set the fabric in the hoop a nd attach the hoop to the
carriage.
Select bor der design pattern SQ14-145 and adjust the
hoop position with the jog keys.
Press the start /stop button and a message will appear
asking you to sew the first marking points.
Press the X key to skip sewing them and pres s the
start/stop button to star t sewing.
q
w
e r
er
t
y
z
x
c
v
n
b
v When finished sewing the desi gn pattern, a message
for the last 2 marking points will appear.
Press the OK key and press the star t/stop button to
sew the last 2 marking points.
e First marking points
r Last marking points