143
m Set the fabric in the hoop an d adjust the fabricposition
to match the centerlines for the secondpattern and
template.
Attach the hoo p to the carriage and press the start/
stop button.
Press the OK key when the message ap pears.
The hoop will move to the first mark ing point for the
second pattern.
Lower the needle by turning the hand whe el to check
if the needle is right above the last marking point of
the first pattern.
Adjust the hoop po sition with the jog keys if necessary.
Press the start /stop button to sew the second pattern.
u
Connecting the patterns in the editing window
You can connect border design patterns in the editing
wind ow.
Open the editing window and select the hoop SQ23.
Select border design pattern SQ14-145.
Move the pattern to the left end and duplicate the pattern.
Move the duplicate to the right until the marking points of
both patterns overlap.
Press the zoom key to enlarge the pattern image.
Press the scroll key and drag the image to show the
marking points.
Press the jog keys and adjust the position of the second
pattern to align the marking points exactly.
q Zoom key
w Scroll key
To adjust the pattern position more precisely, use
EmbLinkTool available in Horizon Link Suite.
Press the OK key and the ready to sew window will open.
Press the start/stop button to sew the pat tern
combination.
To align the second pattern combination, press the stitch
forward key once to move the hoop to the marking points.
Adjust the hoop position so that the needle comes right
above the marking point of the first pattern combination.
e Stitch for ward key
NOTE:
The message for the marking points will not appear,
but marking points will be sewn.
m
,
w
q
e
, Repeat proce ss b to m to sew the desired number of
patterns.
You may sew border design pattern SQ14-146 at the
end of the pattern series.
u Border design pattern SQ14-146