Janome 300E manual Embroidery Hoops, Templates, Embroidery Hoop a, Embroidery Hoop B

3

(1)

1

2

Embroidery Hoops

(1) Embroidery Hoop A:

This is the standard size hoop, with a 12.6 cm (5”) by 11 cm (4 3/8”) embroidery area for sewing PC Card embroidery designs etc.

4

(2) Embroidery Hoop B:

(2)3

1

2

This is the large-size hoop, with a 20 cm (8”) by 14 cm (5 1/2”) embroidery area for sewing large-size designs and combined designs.

1Outer hoop

2Inner hoop

3Attaching knob

4Hoop tightening screw

4

4

2

3

							Templates
							When positioning the fabric into the hoop, use the
	STARTING POINT FOR MONOGRAMMING						template to align the centerlines on the fabric with the
		STARTING	POINT	FOR	MEMORY CARDS (	FROM K-101 )
							center of the hoop. First mark the centerlines on the
			STARTING		POINT FOR BUILT-	IN DESIGNS
							fabric and place the fabric on the outer hoop. Place the
							inner hoop and template over the fabric and adjust the
							fabric placement.
							1	Starting point for built-in and PC Card designs.
							2	Starting point for monogramming in horizontal
1							5	placement
							3	Starting point for Memory Card No. 102 and up for

Memory Craft 5700/9000.

4Starting point for monogramming in vertical placement

5Embroidery boundary for built-in and PC Card designs.

STARTING POINT FOR MEMORY CARDS ( FROM No.102 )
			NOTE:
	STARTINGPOINTFOR MEMORYCARDS(FROMNo.1001)
			The four indentations on the template do not
		6	correspond with reference lines.
			6 Indentations for positioning the template
		1

15