Janome 300E manual

3

5

4

3

Slip the thread through the slit and down into the eye of the take-up lever as shown. Draw the thread down through the left channel.

4Slit

5Eye of the take-up lever

4 5

	5	4	Slip the thread behind the lower thread guide
			from the right.
			5 Lower thread guide
		5	Slip the thread in the needle bar thread guide
			from the left.
			6 Needle bar thread guide
		Thread the needle from front to back by hand or use the
6		built-in needle threader.

NOTE:

Refer to page 11 for built-in needle threader

10