Janome 300E manual Setting the Fabric in an Embroidery Hoop

1

2

1

2 3 4 5

6

5

6

5

4

3

3

Setting the Fabric in an Embroidery Hoop

1Mark the centerlines on the right side of the fabric with tailor’s chalk.

1 Fabric

2 Centerlines

2Loosen the hoop tightening screw of the outer hoop and lay the fabric and the inner hoop over the outer hoop.

3Place the template over the fabric, matching centerlines.

4, 5 Set the inner hoop into the outer hoop and tighten the hoop tightening screw.

3Hoop tightening screw

4Inner hoop

5Template

6Outer hoop

6 Remove the template.

NOTES:

When placing the fabric on the embroidery hoop, place the outer hoop on a flat surface.

For thin and stretchy fabrics use an adhesive type stabilizer (iron-on type) on the wrong side of the fabric. More than one layer may be required.

The Cloth Setter 10000 (optional Item) is very helpful when setting a fabric to a hoop in the right position.

17