| GETTING READY TO SEW |
| Connecting the Power Supply |
| The Memory Craft 300E is equipped with an auto |
1 | voltage system, which automatically adjusts the |
| equipment to accept any local power supply voltage |
between 100 and 240V, 50/60 Hz.
Turn off the power switch and insert the machine plug into the machine.
Insert the power supply plug into the wall outlet and turn the power switch on.
2 | 5 | Power switch |
1 | ||
3 | 2 | Machine plug |
3 | Machine socket | |
| 4 | Power supply plug |
| 5 | Wall outlet |
NOTE:
After turning on the power, it takes approximately six
4seconds for the pattern selection window to be displayed on the visual touch screen.
(This is the required boot up time and is not a defect)
For Your Safety:
While in operation, always keep your eyes on the sewing area, and do not touch any moving parts such as the thread
Always turn off the power switch and unplug the power supply:
-when leaving the machine unattended.
-when attaching or removing parts.
-when cleaning the machine.
Operating Instructions:
“The symbol "O" of a switch indicates the "off" position of a switch.”
“For appliances with a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.”
START
STOP
Start/Stop Button
Press this button to start or to stop the machine. The color of the button changes each time you press it— red when the machine is running, and green when it is stopped.
NOTE:
The Memory Craft 300E is equipped with an automatic shutdown safety feature to prevent overheating when the machine is running overloaded. Follow safety instructions that appear on the visual touch screen if it happens.
5
