|
| Inserting the bobbin | |
z | q | z Place the bobbin in the bobbin holder with the | |
thread running off counterclockwise. | |||
| |||
|
| ||
|
| q Thread | |
|
| w Bobbin holder |
| w |
x | x Guide the thread into the notch on the front of the |
| bobbin holder. |
| e Notch on the front |
| e |
c | c Draw the thread to the left, sliding it between |
| thetension spring blades. |
| r Spring blades |
| r |
v | v Continue to draw the thread lightly until the thread |
| slips into the notch on the side. |
| t Notch on the side |
t
b | y | b Pull out about 10 cm (4") of thread to the rear. |
| Reattach the hook cover plate. | |
|
|
NOTE:
A threading chart is shown on the hook cover plate for your reference.
y Threading chart
13
