Janome JP760 manual Problems and Warning Signals

Problems and Warning Signals

If a buzzer sounds and the indicator shows a warning sign, follow the guidance below.

Warning signal	Problem	Try this
	The start/stop button is pressed with the foot	Disconnect the foot control.
	control being connected.
	The foot control is connected or disconnected	Turn the power switch off when
	while sewing.	connecting or disconnecting the
		foot control.
	The machine is re-started too soon after it	Wait for at least 15 seconds to restart.
	has halted due to the overload.	If threads are jamming, remove
		jammed threads.
	The buttonhole is sewn without lowering	Lower the buttonhole lever and
	the buttonhole lever.	restart the machine.
	Selecting a pattern after buttonhole is completed	Raise the buttonhole lever and re-
	with the buttonhole lever still lowered.	select the pattern.
		Do not sew other pattern with the
		buttonhole foot.
	The bobbin winder spindle is shifted to the right	Return the bobbin winder spindle
	for bobbin winding.	to the left.
	The machine is malfunctioning due to a	Contact the service center or the
	problem in the electronic components.	store from where the machine was
to		purchased.

Audible signal	The buzzer sounds when:
Pip	Normal operation
Pip-pip-pip	Invalid operation
Pip-pip-peep	Buttonhole sewing completed
Peep	Malfunction

It is not abnormal that a faint humming sound is coming out from the internal motors.

This machine equipped with LED sewing light, which will not burn out and does not need to replace.

42