z
q
x
w
c
w
e
vr
b
t
z
x
w
cq e
r
e
CARE AND MAINTENANCE
WARNING:
Turn the power switch off and unplug the machine before cleaning.
NOTE:
Do not dismantle the machine in any way other than what is explained in this section.
Clean the outside of the machine with a soft cloth and mild soap.
Cleaning the Hook Race and Feed Dogs
zRemove the presser foot and needle. Remove screw on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin. q Screw
xLift up the bobbin holder and remove it. w Bobbin holder
cBrush out dust and lint. Wipe the bobbin holder with a soft, dry cloth.
vClean the feed dogs and hook race with the lint brush.
e Lint brush r Feed dog
bWipe the hook race with a soft, dry cloth. t Hook race
NOTE:
You may also use a vacuum cleaner.
Replacing the Bobbin Holder
zInsert the bobbin holder into the hook race.
xMake sure the knob of the bobbin holder fits next to the stopper on the race.
q Knob w Stopper
cReplace the bobbin.
Attach the needle plate, inserting the two guide pins into the holes in the needle plate. Tighten the screw firmly with the screwdriver.
e Guide holes r Screw
41
