Table of Contents |
|
Setup | 3 |
Battery Installation | 3 |
Battery Saver | 3 |
Code Setup | 3 |
Button Functions | 4 |
Code Entry | 6 |
Direct Code Entry | 6 |
Code Search | 7 |
Using Your Remote | 8 |
Code Identification | 8 |
Sleep Function | 9 |
Controlling Devices with Power On and Off .... | 10 |
Controlling Combo Devices | 10 |
VCR/DVD/DVR | 10 |
Volume/Mute Control and | 11 |
All Volume/Mute Control to any one Mode | 11 |
Setting any Mode for its own Volume/Mute .... | 12 |
Troubleshooting | 13 |
Congratulations on your purchase of this universal remote control. All GE brand universal remotes are easy to set up and use. We think you’ll enjoy the unique sliding case feature and compact design this remote offers. It controls up to three devices, including the most popular brands of TV, VCR, DVD, CBL, SAT equipment.
Note: Some functions from your original remote may not be controlled by this remote. Use the original remote, if available, to control such functions. Sometimes buttons other than described in these instructions may actually perform the function. For example, the CHAN and VOL buttons might be used to navigate through menu choices. We recommend you experiment with the remote to identify if such situations pertain to your equipment.
The Slider is easy to use, easy to program, and it gives you total
2
Setup
Battery Installation
1.On the back of the remote, slide the battery cover off.
2.Remove and discard the
plastic tab under the two CR2032 Lithium batteries. When replacing batteries
insert with the + side up.
3. Slide the battery cover back into place.
Note: you will lose any programmed codes after changing the batteries. The remote defaults to the factory setting and you will need to reprogram the
remote.
Battery Saver
Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions).
Setup | SE | TUP |
|
|
The SETUP button is used to setup the remote. You can either setup the remote using the code tables (on separate sheet), or you can search through the library of codes until you find a code that works for your product. Please refer to “Programming with Code Search” page 7 for more information on using the code search feature to learn how to search through the library of codes for your products. NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a VCR code under the SAT/CABLE button, or a Cable code under the DVD/VCR button, etc. However, you can only store TV codes under the TV button.
3
