Jasco RM84964, RM24964 Controlling Devices with Separate Power On and Off Buttons

Using Your Remote, cont.

Controlling Devices with Separate Power On and Off Buttons

Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the POWER button to turn the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.

VCR/DVD Punch-Through

This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, or DVD programmed Mode you used. This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e.g. a TV Combo, SAT/PVR, etc.

10

Using Your Remote, cont.

Volume/Mute Control and Punch- Through

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without the need to change to TV Mode.

Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.

1.	Press and hold the SETUP button until	SETUP
	the red indicator turns on, then release
	the button.
2.	Press and hold the MUTE button until
	the red indicator blinks off, then release
	the button.
3.	Press and release the desired Mode button
	(TV, VCR, etc.) for Volume/Mute control,
	the red indicator blinks then stays on.
4.	Press and release the MUTE button and
	the red indicator turns off. The red
	indicator will blink rapidly for three
	seconds if the Mode you have selected
	has no Volume/Mute control.

All other Modes will now punch-through to your chosen Mode for Volume/Mute control.

11