Jasco RM24964, RM84964 Setting any Mode to use its own Volume/Mute Control, Troubleshooting

Models: RM24964 RM84964

1 9
Download 9 pages 36.94 Kb
Page 7
Image 7
Setting any Mode to use its own Volume/Mute Control

Using Your Remote, cont.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing.

1.

Press and hold the SETUP button until

SETUP

 

the red indicator turns on, then release

 

 

the button.

 

2.

Press and hold the MUTE button until

 

 

the red indicator blinks off, then release

 

 

the button.

 

3.

Press and release the desired Mode

 

 

button (TV, VCR, etc.), the red indicator

 

 

blinks then stays on.

 

4.

Press and release the VOLUME-

 

 

(Down) button, the red indicator blinks

 

 

then stays on.

 

5.

Press and release the MUTE button and

 

 

the red indicator turns off.

 

Your chosen Mode will now use its own Volume/ Mute control.

12

Troubleshooting

Remote does not operate your product.

Press the mode button of the product you want to control.

Program the remote with a new code.

Install new batteries. (You might have to reprogram your remote after installing new batteries.)

Remote may not be compatible with your product.

Remote does not operate some features of your product.

Sometimes a particular code might operate some features but not all. Try programing remote with a new code.

Remote may not be able to operate all features of your device or button names might be different than your product. Try other buttons on the remote. E.G. controlling the MENU cursor may be performed by CHAN or VOL buttons.

Red Indicator blinks after you program a product code.

Remote did not accept the code.

Try to program the code again or try a different code.

Lost Your Codes?

Enclosed with this remote is a sticker on which you should write the codes for each device you programmed. Apply the sticker to the back of the remote or somewhere convenient for future reference.

Also on the sticker is our website address which, should you lose your codes or programming instructions, you can find available on our website: www.jascoproducts.com

13

Page 7
Image 7
Jasco RM24964 Setting any Mode to use its own Volume/Mute Control, Troubleshooting, Remote does not operate your product