Using Your Remote
Code Identification
The Code Identification Feature allows you to identify the 4 digit library code stored under your device key. For example, if you want to find out what 4 digit code is stored under your TV device key, follow the six steps below:
1. Press and hold the SETUP button until | SETUP |
the red indicator stays on. Release the |
|
SETUP button. |
|
2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. | SETUP |
The red indicator blinks once and |
|
remains lit. |
|
4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from
5. To find the second digit, repeat step 4, this time when the red indicator blinks off this is the second digit.
6. Repeat step 4 to find the third and fourth digits.
8
Using Your Remote, cont.
Sleep Function
The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.
1. Press and release the TV mode button.
2.Press and hold the Sleep button
until the LED remains lit (about
3.Release the Sleep button.
4.Press and release the
numeric keys 
for the time required. 
The LED will blink off
to indicate button
press acceptance.
5.TV Sleep Timer is set.
6.Leave the Remote pointing towards the TV with an unobstructed path.
To cancel the Sleep Timer, press and hold the Sleep button until the LED blinks, or press and release the Power key in TV mode.
9
