Jasco RM24964, RM84964 instruction manual Button Functions

Button Functions

Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. LAST may be called RECALL, or DISPLAY may be called INFO. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have LAST ability for

Button Functions, cont.

The most commonly used buttons are accessible even with the remote “closed” as shown below. Just flip it open to gain access to less frequently used buttons.

the LAST button to operate this feature.

Red Indicator	POWER Turns
Lights when any	product On or Off.
button is pressed.
TV, DVD/VCR,
SAT/CBL. Selects
product to be
operated.
MUTE Turns off the
TV sound while the
picture remains.
OK Selects menu
items for the device

SHIFT Press and release to access buttons labeled in blue (red indicator stays on). Press again to exit Shift mode.

CHANNEL UP/DOWN Changes the channels.

Also controls MENU navigation in TV, DVD or SAT mode for many brands/models.

INPUT selects the video input of your TV.

VOLUME UP/DOWN Changes the volume level of the product, normally the TV.

you are controlling.
NUMBERS
Enter numbers for direct
channel selection. Some
products require ENTER to
be pressed after channel
selection.
CC TV Closed		ENTER
	SE	SLEEP
Caption (if your TV	TUP

has this feature) or DVD Subtitle toggle.

EXIT Exit On-Screen Menus and/or Return to previous On-Screen selection. LAST Returns to the

previously selected channel.

RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR keys also control DVD when in DVD Mode. Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for

SETUP

For setup.

ENTER

For some TV models, used after direct channel number entry to immedi- ately change to the selected channel.

SLEEP enables the remote to turn off your TV after a period of 1 to 99 minutes.

three seconds.

MENU Press and release SHIFT then MENU to display the menu on the TV. The red LED is on continuously to indicate the remote is in Menu mode, VOL UP/DOWN buttons operate as cursor right/left, CH+/- buttons operate as cursor up/down, and Mute operates as OK. Press LAST/EXIT button to exit Menu.

DISP Display button shows date and time if your TV or

4

VCR has that feature. 5