JBL CS5, CS3 manual REAR-PANEL Connections

REAR-PANEL CONNECTIONS

English

￿ Composite Video Output	￿ Subwoofer Output	￿ Coaxial Digital Output
￿ S-Video Output	￿ Coaxial Digital Input	￿ Subwoofer Trigger Output
￿ Component Video Outputs	￿ Optical Digital Input	￿ USB On-The-Go Input
￿ SCART TV Output	￿ Analog Audio Outputs	￿ HDMI Output
￿ AC Power Cord	￿ Front Speaker Outputs	￿ Remote IR Output
￿ FM Antenna	￿ Center Speaker Outputs	￿ Remote IR Input
￿ Audio In	￿ Surround Speaker Outputs	￿ TV Audio In

￿Composite Video Output: Connect this jack to the video input on a television or video projector.

￿S-Video Output: Connect this jack to the S-video input on a television or video projector.

￿Component Video Outputs: These outputs carry the component video signals for connection to display monitors with component video inputs. For standard analog TVs or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the corre- sponding inputs. If you have a high-definition TV or projector that is compatible with high-scan-rate progressive video, connect these jacks to the “HD Component” inputs. Note that if you are using a progressive scan display device, then ”Progressive” must be selected in the Video Setup menu, in order to take advantage of the progressive-scan circuitry. See page 20 for more information on progressive-scan video.

IMPORTANT: These jacks should NOT be connected to standard composite video inputs.

￿SCART Out (TV): If your TV has a SCART socket, you can con- nect a SCART cable to your TV and to your DVD player for improved video quality. The SCART cable carries both audio and video. You can select composite video or RGB video for that SCART connector’s video output signal.

￿AC Power Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make sure it is in the On position.

￿FM Antenna: Connect to the supplied FM antenna.

￿Audio In: Connect to a line-level analog audio source: TV, tape player, Minidisc, PC, etc.

￿Subwoofer Output: Connect to the SUB/LFE input on the sub- woofer.

￿Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not con- nect the RF digital output of an LD player to these jacks.

￿Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source.

￿Analog Audio Outputs: Connect these jacks to the analog audio input on a TV set or external audio system for analog audio play- back or to the RECORD/INPUT jacks of an audio recorder for recording.

￿Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White terminal is the positive (+) terminal that should be connected to the red (+) termi- nal on Front Left speaker with the older color coding, while the Red terminal is the positive (+) terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black (–) terminals on the CS to the black (–) terminals on the speakers. See page 14 for more information on speaker polarity.

￿Center Speaker Outputs: Connect these outputs to the matching + and – terminals on your center channel speaker. In conformance with the new CEA color code specification, the Green Terminal is the positive (+) terminal that should be connected to the red (+) ter- minal on speakers with the older color coding. Connect the black

(–) terminal on the CS to the black negative (–) terminal on your speaker. See page 14 for more information on speaker polarity.

￿Surround Speaker Outputs: Connect these outputs to the match- ing + and – terminals on your surround channel speakers. In con- formance with the new CEA color-code specification, the Blue ter- minal is the positive (+) terminal that should be connected to the red (+) terminal on the Surround Left speaker with older color cod- ing, while the Gray terminal should be connected to the red (+) ter- minal on the Surround Right speaker with the older color-coding. Connect the black (–) terminal on the CS to the matching black neg- ative (–) terminals for each surround speaker. See page 14 for more information on speaker polarity.

NOTE: You’ll find more details about all audio/video connections under Setup and Connections on the following pages.

￿Coaxial Digital Output: Connect this jack to the matching digital input connector on a digital recorder (e.g., CD-R or MiniDisc recorder).

9