JBL CS5, CS3 Optional Audio Connections Aux Input for External Source, Aux Output for Recording

Models: CS5 CS3

1 36
Download 36 pages 58.37 Kb
Page 15
Image 15

INSTALLATION AND CONNECTIONS

Connecting VCR and Sat Decoder (Methods 5 and 6)

The diagram below shows possible connection methods for common system configurations. These are intended as guidelines only. Due to differences in equipment specifications, the method of connection for your equipment may be different from that shown. Please consult the owner’s manual for your equipment for further guidance.

Connecting Set-Top Box or Digital Satellite Receiver (Method 7) – Using Coaxial Digital Cable

To listen to the digital multichannel signal or downmix from set-top boxes or digital satellite receivers, connect the Coaxial Digital Out of your device to the Coaxial Digital In ￿ on the CS receiver.

Optional Audio Connections

Aux Input for External Source

You may connect a line-level stereo analog audio source such as a Sat receiver, tape deck, phono preamp of a record player, etc., to the receiver’s rear-panel Audio In Input ￿ sockets to enjoy the benefits of your CS system with other source components.

VCR Connection-Audio (cables not Included): To listen to the sound from your stereo VCR through the speakers of this system, connect the Left/Right audio output jacks of your stereo VCR to the Left/Right audio input jacks Audio In ￿ of this system.

Aux Output for Recording

To record the sound of the CS system with your VCR or any audio recording device (tape deck, MD, CDR and some others), the Audio Out Jacks ￿ should be connected to the analog Record In jacks of the appropriate device. They can also be connected to any audio input on your TV to listen to the sound of your CS receiver through the speakers of your TV only, when the amp in your subwoofer is turned off and the volume of the CS receiver has been turned down completely. If the speakers of your CS system are active, the volume on your TV should be turned down.

Digital In- and Outputs

Connect the digital output of any digital sources such as an optional CD or DVD changer or player, advanced video game, a digital satellite receiver, HDTV tuner or digital cable set-top box or the output of a compatible computer sound card to the Optical and Coaxial Digital Inputs ￿￿.

Connect the Coaxial Digital Output ￿ on the rear panel of the CS to the matching digital input connections on a CD-R or MiniDisc recorder.

Note (When Connecting the Optical Digital Audio Cable – Optional):

Gently push the cable plug through the built-in shutter that covers the optical digital audio output and connect the cable firmly so that the configurations of both the cable and the connector match.

Speaker Placement

The placement of speakers in a multichannel home theater system can have a noticeable impact on the quality of sound reproduced.

Depending on your viewing device, place the center speaker either directly above or below your TV, or in the center behind a perforated front-projection screen.

Once the center channel speaker is installed, position the left-front and right-front speakers so that they are as far away from one another as the center channel speaker is from the preferred listening position. Ideally, the front-channel speakers should be placed so that their tweeters are no more than 60cm above or below the tweeter in the center channel speaker.

Depending on the specifics of your room acoustics, you may find that imaging is improved by moving the front-left and front-right speakers slightly forward of the center channel speaker. If possi- ble, adjust all front loudspeakers so that they are aimed at ear height when you are seated in the listening position.

Using these guidelines, you’ll find that it takes some experimenta- tion to find the correct location for the front speakers in your particular installation. Don’t be afraid to move things around until the system sounds correct. Optimize your speakers so that audio transitions across the front of the room sound smooth.

When the CS is used in 5.1-channel operation, the preferred location for surround speakers is on the side walls of the room, at or slightly behind the listening position.

English

15

Page 15
Image 15
JBL CS5, CS3 Optional Audio Connections Aux Input for External Source, Aux Output for Recording, Digital In- and Outputs