JBL CS3, CS5 manual REAR-PANEL Connections

REAR-PANEL CONNECTIONS

￿Subwoofer Trigger Output: Connect this trigger output to the trigger input of the JBL subwoofer, so that the subwoofer will switch on and off at the same time as the rest of the system.

￿USB On-the-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct play- back of audio, image of video files, a digital photo camera or a USB hub.

￿HDMI Output: Connect this output to the HDMI input of a high- definition LCD, plasma or video projector for the best possible picture quality.

￿Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on JBL or other compatible equipment.

￿Remote IR Input: If the CS3/CS5’s front-panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

￿TV Audio Input: If your screen is connected to the CS by an HDMI, component, S-video or composite cable, connect the analog output of your TV to this input. If you have your TV connected to the CS with a SCART cable, an audio connection to the TV input is not necessary.

10