F E A T U R E S

6AUTO EQ SETTING

AUTO EQ SETTING includes two setup buttons, MAIN SETUP 1&2 and AUX SETUP 3&4, and associated LED indicators for state confirmation. For detailed operation, refer to See Using The Auto EQ Setting on page 11.

After the Auto EQ filters have been set, use AEQ ON to turn Auto EQ on or off. An associated LED indicator will confirm your selection.

7DELAY SETTING

Press DELAY SETTING to initiate delay setup on auxiliary outputs, AUX OUT 3A (left) and AUX OUT 4B (right). For detailed operation, refer to Delay Setting on page 14.

The orange SETUP LED will flash during setup and the green DELAY SET LED will turn on once the delay time has been set on auxiliary outputs, AUX OUT 3A (left) and AUX OUT 4B (right).

8POWER Indicator

A green LED indicates EVOi.net is being powered.

9RS232 Connector

Use this 8-pin mini DIN connector to connect the EVOi.net to a PC’s RS232 port.

5

EVOi.net

Page 7
Image 7
JBL EVOi.net manual Power Indicator, RS232 Connector