not have the file you should be able to retrieve it from the SDEC directly.
NOTE: To access the design file you will need a user name and password
•User Login: JBL Synthesis Dealer
•Password: synthesis
.
Figure 9.
6.2.2Opening from a Network Device
The SDEC allows you to use the unused portion of memory as a virtual hard drive. This space can be used to store copies of the design file (as from the factory) or copies of your customized design for the specific installation you are working on... To do this select “File” then to “Open from Device Network” instead of “File” and “Open”
Note: Check to make sure that you are using the most current version of the control file. Please contact JBL Synthesis Technical Support or your JBL Synthesis Representative for the most current information.
6.2.3Firmware Upgrade
If the firmware needs to be updated, check OK to proceed. The unit may need to be rebooted. The software will check to make sure the unit has the latest version automatically. You will receive a message that “No Matched Devices” are found. This is because the unit is being rebooted during firmware upgrade. Wait for the unit to reboot and click Online as described above.
6.2.4HiQnet Node Address
If the below HiQnet node address message appears, click NO. We want to maintain the address of the device in the design, and then click OK. The device will be rebooted. You will need to wait for the unit to reboot and click Online as described above.
Figure 10.
6.2.5Design Configuration
The design that the hardware has in its memory will be checked against the design you have in your software. These must match. If they do not match it will be necessary to have the design updated. Please call your JBL Synthesis Representative for instructions. It can be done in the field but special instructions are needed. The Java remote does not require and special login.
- 11 -
SDEC