JBL SDEC-4000, SDEC-3000 manual 6.3.4Channel Output

Models: SDEC-4000 SDEC-3000

1 24
Download 24 pages 24.52 Kb
Page 15
Image 15
6.3.4Channel Output

6.3.4Channel Output

Use each output to adjust each channel to give the same output level using an SPL meter.

6.3.5Level Matching Multiple Surround and Subwoofer Channels

The SDEC-4000 has multiple outputs for Subwoofers and Side Surrounds. These will need to be level matched to each other before final output levels are set.

1.Using the internal noise test of the SDP test each output individually. It will be necessary to mute the output you are not testing. Make sure the Trim Link is off (not RED).

2.Once you have set each to the reference level (75dB) enable the Trim Link feature so that the led turns RED.

3.With all the multiple channels un-muted test together and adjust the output to reach the same reference level. You will now have an output that has all the multiple channels level matched and the overall output set to the reference level.

Figure 14.

- 15 -

SDEC -X000 DACS Calibration Manual v1.0.doc

Page 15
Image 15
JBL SDEC-4000, SDEC-3000 manual 6.3.4Channel Output