Setting the Clock
1.Press Clock pad.
• The indicator word TIME will flash in the display,
2. Press the appropriate number pads untilthe correct time of day appears in the display.
When electrical power is supplied or after a power interrup- tion, the last clock time, before power was interrupted, will flash.
To recall the time of day when another time function is showing, press the Clock pad.
Clock time cannot be changed when the oven has been programmed for clock controlled cooking,
Controls at a Glance 6
4. At the end of the time set, the timer will beep and "End"
will appearin the display. To change the numberof timer beeps and add reminder beeps, see page 7.
To cancel:
1. Press and hold Timer pad for three seconds. The time of day will reappear.
OR
2. Press the Timer pad and the "0" number pad. After a slight delay the time of day will reappear.
NOTE: Pressing StopClear pad to cancel the timer will cancel ALL selected oven functions except the timer.
Setting the Timer
Use to set andthen signal the completion of a time period up to 99 hours and 59 minutes.
The timer can be used independently of any other oven activity and can be set while another oven function is oper-
ating. The timer does not control the oven.
1.Press Timer pad.
• The indicator word TIMER will flash and "0Hr:00" appears in the display,
2.Press the appropriate number pads until the desired num- bet of minutes or hours and minutes appear in the display.
Example: To set the Timer for5 minutes, press the Timer pad and the number 5 pad. The control will begin
countdown after a four second delay.
Example: To set the Timer for 1 hour and 30 minutes, press the Timer pad and the numbers 1,3,0 pads. The control will begin countdown after a four second delay.
3.The last minute of the countdown will be displayed as seconds,
Control Options
Control Lockout Option
The control touch pads can be locked to prevent unwanted
use. They will not function when locked.
If an oven function is currently being used, the controls
cannot be locked.
The current time of day will remain in the display when this
feature is activated.
Setting Control Lockout
1.Press and hold the Stop Time and the Stop/Clear pads at
the same time for three seconds. The control will beep when option is activated.
•The indicator word OFF will appear in the display for 15 seconds if any pad is pressed.
To Cancel: Press and hold the Stop Time and the Stop/ Clear pads at the same time for three seconds. The indicatoi word OFF will disappear in the display.
Cancel Clock Display Option
If you prefer that the time of day not be displayed:
1.Press Clock and Stop/Clear pads at the same time ant hold for three seconds.
2.Press Clock pad to briefly recall the time of day, ifdesired
To restore: Press the Clock and Stop/Clear pads at the sam_ time and hold for three seconds. The time of day will reappeaJ in the display.
