Important Installation Suggestions

1.Chamfer all exposed edges of decorative laminate to prevent damage from chipping.

2.Radius corners of cutout and file to insure smooth edges and prevent corner cracking.

3.Rough edges, inside corners which have not been rounded and forced fits can contribute to cracking of the countertop laminate.

4.Countertop must be supported within 3￿ of cutout.

On any burner, closing the air shutter too far will cause the flame to become soft and yellow tipped. Opening the air shutter too wide will cause the flame to blow away from the burner ports. Proper adjustment will produce a sharp, clearly defined, even blue flame.

Low Flame Adjustment

(See Illustration “C”)

This appliance is shipped from the factory with low and medium flame settings adjusted for use with Natural Gas. If further adjustment is necessary, or to re-adjust for use with LP, proceed as follows:

1.Light burner and set control knob for low flame.

2.Remove control knob from valve stem.

Pressure Testing

The maximum gas supply pressure for the appliance pressure regulator supplied on this appliance is 14￿ W.C. The test pressure for checking this appliance pressure regulator must be at least 6￿ W.C. for Natural Gas, and at least 11￿ W.C. for LP. It is shipped from the factory set for Natural Gas at 5￿ W.C.

This appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2￿ PSIG (3.5 k Pa).

This appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2￿ PSIG (3.5 k Pa).

Appliance Pressure Regulator Conversion

(See Illustration “D”)

This unit is supplied with a Maxitrol Appliance Pressure Regulator. Follow the instructions in illustration “D”.

MAXITROL APPLIANCE PRESSURE REGULATOR

CAUTION: NEVER USE A METAL BLADE TO PRY KNOB OFF. IF KNOB CANNOT BE EASILY REMOVED, TUCK THE FOLDS OF A CLOTH DISHTOWEL UNDER THE KNOB AND PULL THE TOWEL UPWARD WITH STEADY, EVEN PRES- SURE.

LP

CONVERTER

CAP

AND PIN

NATNAT

APPLY DOWNWARD

FINGER PRESSURE

AT DISC EDGES TO

REPLACE PIN IN CAP

APPLY SIDEWARD FINGER

PRESSURE TO LP REMOVE PIN

FROM CAP

3.Insert a slender, thin-blade screwdriver into the recess at center of valve stem and engage blade with slot in adjusting screw.

4.Turn center stem adjusting screw to set flame size.

. . . clockwise to reduce.

. . . counterclockwise to increase.

5.Replace control knob when adjustment is completed.

Proper adjustment will produce a stable, steady blue flame of minimum size. The final adjustment should be checked by turning knob from high to low several times without extinguishing the flame.

This adjustment, at low setting, will automatically provide the proper flame size at medium setting.

Illustration “C”

Illustration “D”

6

Page 6
Image 6
Jenn-Air JGD8348CDP installation instructions Important Installation Suggestions, Low Flame Adjustment, Pressure Testing

JGD8348CDP specifications

The Jenn-Air JGD8348CDP is a sophisticated gas cooktop designed for culinary enthusiasts who demand precision, style, and efficiency in their cooking spaces. With its sleek stainless steel finish and modern design, this cooktop not only enhances the aesthetic of any kitchen but also boasts a range of features aimed at delivering exceptional cooking performance.

One of the standout attributes of the Jenn-Air JGD8348CDP is its powerful burners. With five sealed burners, including a high-powered, 20,000 BTU Dual-Flame Burner, this cooktop excels in providing rapid heating and precise simmering capabilities. The dual-flame design allows for a broad range of heat settings, making it perfect for tasks ranging from quickly boiling water to gently melting chocolate without scorching.

The cooktop is equipped with advanced cooking technologies, including the Smart Heat technology that ensures even cooking temperatures across the surface. This feature minimizes hot spots and provides consistent results, thereby enhancing the overall cooking experience. Each burner is meticulously engineered for optimal performance, guaranteeing that home cooks can achieve restaurant-quality results.

Safety is another highlight of the Jenn-Air JGD8348CDP. The unit features an automatic re-ignition system that reignites the flame if it is accidentally blown out, providing peace of mind while cooking. Additionally, the cooktop includes a stainless steel griddle that offers a versatile cooking surface perfect for preparing pancakes, grilled sandwiches, and much more.

Cleaning up after cooking is made easy thanks to the seamless design of the cooktop. The porcelain-coated cast-iron grates are dishwasher safe, allowing for effortless maintenance. The smooth surface ensures that spills can be wiped away quickly, keeping the cooktop looking pristine.

Moreover, the knobs are thoughtfully designed, providing an intuitive interface for adjusting heat levels. With the addition of an integrated electronic ignition system, users can ignite the burners quickly and efficiently with just a turn of the knob.

In summary, the Jenn-Air JGD8348CDP gas cooktop is a premium choice for those looking to elevate their cooking experience. Its powerful burners, advanced technologies, and user-friendly features come together to create a stylish yet functional centerpiece for any kitchen. Whether you're a novice or an experienced chef, this cooktop offers the performance and precision needed to unleash culinary creativity.