To Turn Off a Bridge:
1.Touch the Bridge keypad for the zone being used (left side bridge or right side bridge).
The surface cooking areas will resume operation as 2 separate areas.
NOTE: Performance Boost cannot be used on the same elements in combination when the Bridge function.
Pan Detection
If the system cannot recognize the pan, or if the pan has been removed from the surface cooking area, the “replace pan” animation appears in the cooking area display as a reminder. See the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch Off.
If a Timer is running when a pan is removed, the countdown will continue.
Control Lock
The Control Lock avoids unintended use of the surface cooking areas.
If Control Lock is activated when power to the cooktop is off, the cooktop is locked out, and the surface cooking areas cannot be turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all keypads are locked out except for the Power and On/Off keypads.
To Lock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds. After 3 seconds, a tone will sound and the indicator light above the Control Lock keypad will light, indicating that the cooktop controls are in the lockout position.
If the cooktop is in use when Control Lock is activated, cooking will proceed as normal and any timers that have been set will continue their countdown.
To Unlock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds.
Performance Boost Function
This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less.
NOTE: Performance Boost is not available when the Bridge function is activated.
30” (76.2 cm) Model JIC4430X
Performance Boost function is available on only 1 surface cooking area at a time within a zone. If you attempt to use another surface cooking area in the same zone, “P” and “9” will briefly flash in the display before returning to heat setting level 9. The surface cooking area that was set to the Performance boost function will automatically reset to heat setting level 9. See the following illustrations for zones.
AD
B | C |
Zone 1 | Zone 2 |
A. Surface cooking | C. Surface cooking area 3 |
area 1 | D. Surface cooking area 4 |
B. Surface cooking |
|
area 2 |
|
36” (91.4 cm) Model JIC4536X
Performance Boost function is available on all surface cooking areas at the same time within a zone. See the following illustrations for zones.
ACD
B
Zone 1 | Zone 2 |
A. Surface cooking | C. Surface cooking |
area 1 | area 3, dual |
B. Surface cooking | element with |
area 2 | 5000W |
| performance |
| boost |
E
Zone 3
D. Surface cooking area 4
E. Surface cooking area 5
9
