Jenn-Air LI3UNB/W10274316B Range Hood USE, Complete Installation and Check Operation

Models: LI3UNB/W10274316B

1 32
Download 32 pages 54.53 Kb
Page 11
Image 11

4.Use UL listed wire connectors and connect white wires (A) together.

WARNING

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire in terminal box.

Failure to do so can result in death or electrical shock.

5.Connect green (or bare) ground wire from home power supply to the green/yellow ground wire (D) in terminal box using UL listed wire connectors.

6.Install terminal box cover.

7.Check that all light bulbs are secure in their sockets.

8.Reconnect power.

Complete Installation and Check

Operation

1.Install grease filters. See the “Range Hood Care” section.

2.Install heat lamps into heat lamp sockets.

3.Check operation of the range hood blower and lights. See the “Range Hood Use” section.

F

E D

G

A C

 

B

A. Infrared lamp

E. Halogen light switch

B. Grease filter handles

F. Halogen lights

C. Grease filter

G. Infrared lamp controls

D. Blower control switch

 

4.If range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. Disconnect power supply and check that the wiring is correct.

NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

The hood controls are located on the right-hand underside of the range hood.

ABC

A. Infrared lamp switch

B. Halogen light switch

C. Blower control switch

Range Hood Controls

Operating the lights

1.Turn the light switch to the “Night” position to use the range hood lights as a night light.

2.Turn the light switch to the “High” position to turn the range hood lights On.

3.Turn the light switch to the “Off” position to turn the range hood lights Off.

Operating the blower

1.Turn the blower switch to the first position to turn the range hood on Low.

2.Turn the blower switch to the second position to turn the range hood on Medium.

3.Turn the blower switch to the third position to turn the range hood on Medium - High.

4.Turn the blower switch to the High position to turn the range hood on High.

5.Turn the blower switch to the “Off” position to turn the range hood blower Off.

Operating the heat lamp

NOTE: Heat lamp bulbs should be rated to a maximum of 175 watts each.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

1.Turn the heat lamp switch to the “High” position to turn the heat lamps On.

2.Turn the heat lamp switch to the “Off” position to turn the heat lamps Off.

11

Page 11
Image 11
Jenn-Air LI3UNB/W10274316B Range Hood USE, Complete Installation and Check Operation, Range Hood Controls