With a previous network installation

NOTE: This procedure is only required when the PC is used stand-alone for demonstration purposes etc.

Install the 'MS Loopback' adapter as above,

Select the 'Bindings' tab,

From the 'Show bindings for' drop-down box select 'all adapters',

Note: Both the network adapter(s) and the MS Loopback should be listed,

Highlight the network adapter(s) and press the 'Disable' button

Note: Make sure the MS Loopback adapter remains enabled!

Close the network applet and re-start the PC

Verify the network operation by double-clicking 'Network Neighborhood'.

HINT: When returning the PC to an active network environment disable the MS Loopback adapter and re-enable the network adapter(s)!

A741

12

Print Server Manual

Page 20
Image 20
Ricoh A741 manual With a previous network installation