Ricoh A741 manual Use of pensets, Use of stamps

Final processing by rfxServer.

When the print command is issued in the server a job file is created and stored in one of the spool directories. This job file contains both the print options and the raster file generated in the process above.

The rfxServer will do the following actions: Decompres the Raster file

Scale and/or rotate the image

Add any stamp

7.5Use of pensets

Various CAD packages and printers use different pensets, which may or may not have to be redefined for various software and printers.

As described previously when importing a document, pensets are applied as the document is RIPped. If a penset is added to a project (by group or individual files), then initially these settings will have no effect until the file is re-RIPped again. To do so goto the print/plot file properties and select the Names tab. Press the RIP button. At this moment only the RASTer file is re- generated. Any changes will not show-up in the thumbnail file. To check if settings took place start Imaging and see the results.

We now have to add a penset to a project, edit the penset and save it under a new name. We have to delete the penset we initially added and then include the newly created penset.

7.6Use of stamps

Currently we can only use the exiting sample stamps or new stamps created using only text.

Print Server Manual 31 A741