INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Level

Drill with 1¼" (3.0 cm), ³⁄₈" (9.5 mm), and ⁵⁄₁₆" (7.9 mm) drill bits

Pencil

Wire stripper or utility knife

Tape measure or ruler

Pliers

Caulking gun and weatherproof caulking compound

Vent clamps

Jigsaw or keyhole saw

Flat-blade screwdriver

Metal snips

Phillips screwdriver

Metric Allen wrench set

Parts needed

Home power supply cable

½" (12.7 mm) UL listed or CSA approved strain relief

3 UL listed wire connectors

For vented installations, you will also need:

1 wall or roof cap

Metal vent system

For non-vented (recirculating) installations, you will also need:

Recirculation Kit Part Number W10272062 for non-vented (recirculating) installations only. See “Assistance or Service” section to order.

8" (20.0 cm) dia. round metal vent duct - length required is determined by ceiling height.

Parts supplied

Remove parts from packages. Check that all parts are included.

Hood canopy assembly with ventilator and light bulbs installed

Vent transition with back draft dampers installed

Metal grease filter

Vent cover support bracket

Mounting template

2-piece vent cover

8 - 4 x 8 screws

6 - 5 x 45 mm mounting screws

3¼" x 10" (8.3 x 25.4 cm) rectangular damper

2 - 8 x 40 mm wall anchors

4 - 10 x 50 mm wall anchors

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the vent hood.

Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) Installation see “Connect Vent System” section. Recirculation Kit Part Number W10272062 is available from your dealer or an authorized parts distributor.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

10¹⁄₂"

(26.7 cm)

13" (33.0 cm)

*43³⁄₄" (111.1 cm) min.

56³⁄₄" (144.1 cm) max.

**43³⁄₄" (111.1 cm) min. 53" (134.6 cm) max.

15¹⁄₄" (38.7 cm)

26" (66.0 cm)

 

20¹⁄₂"

32"

(52.1 cm)

 

(81.3 cm)

 

*For non-vented (recirculating) installations

**For vented installations

4

Page 4
Image 4
Jenn-Air LI3URB/W10274314C installation instructions Installation Requirements, Tools and Parts, Location Requirements

LI3URB/W10274314C, W10274314C specifications

The Jenn-Air W10274314C, also known as the LI3URB, is a sophisticated appliance that embodies modern cooking technology and user-friendly features. As part of Jenn-Air's esteemed line of kitchen products, this model is designed to enhance culinary experiences, making it a staple for both amateur cooks and experienced chefs.

One of the standout features of the Jenn-Air W10274314C is its impressive performance capability. This appliance is engineered to deliver precise temperature control, allowing for a more consistent cooking experience. It utilizes advanced technology to ensure that your dishes are cooked evenly, providing delicious results every time. The design includes multiple burner configurations, enabling users to prepare various dishes simultaneously while maintaining optimal heat levels.

Additionally, the LI3URB/W10274314C showcases a sleek, modern aesthetic that seamlessly blends into any kitchen décor. Its stainless steel finish not only adds a touch of elegance but also ensures durability and ease of cleaning. The appliance is equipped with a spacious cooking surface, making it ideal for family meals and entertaining guests.

Another notable characteristic is its exceptional safety features. The Jenn-Air W10274314C includes an automatic shut-off function, ensuring peace of mind when using the appliance. This innovative technology helps prevent overheating and reduces the risk of accidents in the kitchen.

Furthermore, the appliance boasts an intuitive control panel, making it easy to navigate through various settings. Users can select from a range of cooking modes and adjust the temperature with precision. The built-in timer is a useful addition, allowing you to focus on other tasks without the fear of overcooking.

The Jenn-Air LI3URB/W10274314C is also compatible with various cooking styles, from gas to induction heating, catering to diverse culinary preferences. Whether simmering sauces, searing meats, or steaming vegetables, this appliance handles it all with finesse.

In summary, the Jenn-Air W10274314C, LI3URB/W10274314C presents a blend of design, safety, and advanced cooking technology. Its features make it an excellent choice for anyone looking to elevate their cooking experience while enjoying the benefits of modern kitchen innovations.