12
VM9213
TUNER OPERATION

Tuner TFT Display

1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Stereo reception indicator
5. Tuning mode indicator (local/distant)
6. Preset radio stations: Touch to recall preset stations
7. No information in Tuner mode
8. Touch for quick access to Equalizer level settings
9. Touch to access the direct entry screen
10. Preset station indicator
11. |<<: Touch to seek backward
12. >>|: Touch to seek forward
13. <<: Touch to tune backward one step
14. >>: Touch to tune forward one step
15. BAND: Touch to change between AM/FM bands
16. AS: Touch to automatically store stations
17. Touch to view the SOURCE MENU and select a new
playback source
18. MEM: View screen used to enter current channel into
preset memory
19. PS (Preview Scan): Touch to scan all stations available,
stopping for 5 seconds at each and continuing until a
station is selected
20. View setup menu.

Switch to Radio Tuner source

• Touch the top left corner of the screen (the RADIO
circle) to view the SOURCE MENU. Touch “Radio”.
• Press the SRC button (6) on the front panel or remote
control (8) to switch to the AM/FM source.

Select FM/AM Band

Touch the BAND button (15) on the screen, or press the
BAND button on the unit (3) or remote control (30) to change
between the following bands: FM1, FM2, FM3, AM1, and
AM2.
NOTE: The BAND button on the unit only works when the
TFT is closed.
Seek Tuning
To seek the next station:
• Touch the >>| button on screen (12).
• Press the >>| button (19) on remote control.
To seek the previous station:
• Touch the |<< button on screen (11).
• Press the |<< button (17) on the remote control.
Manual Tuning
To increase or decrease the tuning frequency one step:
• Touch the or buttons on screen (14, 13).
• Press the >> or << buttons (14, 22) on the remote
control.
Direct Tuning
To enter a radio station directly, touch the button (9) or
press the GOTO button (21) on the remote control to display
the direct entry menu.
Enter the desired radio station using the on-screen number
pad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the
preset screen.
3. Touch the preset number in which you would like to
store the current station (or touch Exit to cancel and
close the menu). The preset number and station
appears highlighted.
AS (Auto Store)
Touch the on-screen AS button (16) to automatically store six
strong stations as presets for the band currently in use.

Local/Distance

Press and hold the rotary encoder (5) while in tuner mode to
change the Local/Distance radio reception mode. The “LOC”
icon (5) on the top of the LCD is illuminated when the Local
option is selected.
4
110 2
5
7
83
6
17
RADIO
FM-1 P1 87.5 MHz
01:02PM
E
Q
PS
BAND AS MEM
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
ST LOC 9
11
12
19
14
15
13
16
18
20
FM:___._MHz
123
456
789
0Clear
Exit
Preset:_
Exit
P1 P2 P3
P4 P5 P6