DVD/VCD Video Operation

VM9213

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays the following: “Warning !!! It is illegal to view video while driving or operating a motor vehicle. Set parking brake to view video.” Rear video screens, if applicable, will operate normally.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (6) on the front panel or remote control

(8) or touch the top left corner of the screen.

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

Pausing Playback

Touch the play/pause button (>) on the screen or press the >/

button on the remote control (18) to suspend or resume disc play.

Slow Motion Playback

Press the /BAND button on the remote control for slow motion playback (Slow Forward: 1/2, 1/4, 1/6, 1/7, Slow Rewind: 1/2, 1/4, 1/6, 1/7).

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (4). The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (4) again to close the TFT screen.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized. When parental code is entered using the remote, the play/ pause button must be pressed to confirm entry. (See “General Sub-menu Features” on page 9.)

You cannot insert a disc if there is already a disc in the unit or if the power is off.

A – Displays playing information

B – Displays on-screen control menu

Controlling Playback

To access the on-screen controls, touch the bottom 1/3 of the screen (section B). Touch the 1/2 button to view a second page of controls

Rewind

Press the << button (22) on the remote control or the << button on the screen to play the current title in reverse. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Press >/ (18) on the remote control or touch the on screen play button (>) to resume normal play.

Fast Forward Playback

Press the >> button (14) on the remote control or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Press >/ (18) on the remote control or touch the on screen play button (>) to resume normal play.

Repeat Playback

Press the REPT button (7) on the remote control or the button on screen to alter repeat mode according to the following:

•DVD: Repeat Chapter, Repeat TItle, Repeat Off

•VCD (PBC Off): Repeat Single, Repeat Off

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (11) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism

operation occurs, press and hold the button (11) on the unit or remote control (35) to reset the loading mechanism.

BACK

1/2 MENU

EQ	BACK
	AUDIO
	A-B
	SUBTITLE
TITLE	2/2 DISP

NOTE: For VCD play, the repeat function is not available if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.

•	Press the REPT A-Bbutton (6) on the remote control to
	set the start point (A) of the repeated section.
•	Press the REPT A-Bbutton again once you reach the
	desired end point (B) of the repeated section. The
	selected portion of the DVD will now repeat
	continuously.

Normal operation resumes.

Stopping Playback

Touch the stop button ( ) on the screen or press the button (20) on the remote control to stop DVD play.

• Press the REPT A-Bbutton again to cancel the A-B

section setting and stop repeat play.

Jensen VM9213 operation manual DVD/VCD Video Operation

Models: VM9213

VM9213