VM9223
OPERATING INSTRUCTIONS
Power On / Off
Press the
/SRC button (6) on the unit (or the
button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7).
Press and hold the
button to power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Mute
Press the MUTE button on the front panel (1) or the MUTE button (3) on the remote control to mute the volume from the unit. Press the MUTE button again to restore the volume. The yellow volume icon appears on the TFT with an “X” through it. Adjusting the volume or using any of the audio setup features cancels the mute function.
Playing Source Selection
Press the SRC button (6) on the front panel or the SRC button (8) on the remote to change between available playing sources. The playing mode is displayed on the TFT screen.
External peripheral devices can be connected to this unit via the rear RCA inputs or the A/V INPUT connector (10) on the front of the unit. Select
Connect the external device to the 2.5mm to 3.5mm Media Cable and then plug the cable into the A/V INPUT connector
(10) on the front of the radio. Select “AUX IN1” mode to |
access an auxiliary device connected to the A/V INPUT on |
the front of the radio. You cannot directly control external |
back of the head unit allows connectivity to the PAC adapter. Please refer to the instructions included with the PAC adapter for detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1.Vol Down
2.Vol Up
3.Mute
4.Seek Down / Previous Track / ** Preset Down
5.Seek Up / Next Track / ** Preset Up
6.SRC (Source)
7.** Select
8.** Select
9.Band
**If additional steering wheel control buttons are available on the vehicle, function 7 / 8 may be assigned the "Select" feature. This feature / function may not be available on some vehicles.
Select Operation
If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily, Preset Up will be selected. If "Select" (function 7 or 8) is held down and function 5 is pressed momentarily, Preset Down will be selected.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Press the EQ button on the touch screen to display the audio menu.
To adjust an audio feature:
1.Use the touch screen, or press the (>>)/(<<) buttons (14, 22) on the remote control to highlight the audio fea- ture to be adjusted.
2.Touch the screen to select the highlighted option.
3.Touch the +/– buttons on the screen or press the <<, >>, >>, or << buttons (17, 19, 14, 22) on the remote control to adjust the selected feature to the desired setting.
Table 3: Audio Adjustments
Audio Function | Adjustable Range |
|
|
|
|
EQ | User |
| Rock |
|
|
| Hip Hop |
|
|
| Dance |
|
|
| Latin |
|
|
| Rave |
|
|
| Urban |
|
|
| Acoustic |
|
|
BASS | |
|
|
MID | |
|
|
TREB | |
|
|
SUB | |
|
|
Grid | |
|
|
NOTE: The EQ mode will automatically change to “USER” when individual audio functions are adjusted.
The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen.
devices connected to the A/V INPUT. |
Volume Adjustment
To increase or decrease the volume level, press the VOL+/ VOL- buttons (15, 16) on remote control or front panel (5). The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds.
Steering Wheel Control (SWC)
The VM9223 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter
| EQ | User |
|
+14 | — | 0 — |
|
0 | — | — | L |
| |||
| BASS MID | TREB | SUB |
User
FAD BAL
F
R
R
System Reset
To correct a system halt or other illegal operation, use the tip of a pen
to press the reset button (12) located
on the front
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.
6
