Jensen VM9313 operation manual DVD/VCD Video Operation

Models: VM9313

1 106
Download 106 pages 63.87 Kb
Page 21
Image 21

VM9313

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (4). The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (4) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “General Sub-menu Features” on page 10).

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

A

B

A – Displays playing information

B – Displays on-screen control menu

Controlling Playback

To access the on-screen controls, touch the bottom 1/3 of the screen (section B). Touch the 1/2 button to view a second page of controls

Slow Motion Playback

Press the << button (22) on the remote control or the << button on the screen to play the current title in slow motion. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Press >/ (18) on the remote control or touch the onscreen play button (>) to resume normal play.

Fast Forward Playback

Press the >> button (14) on the remote control or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Press >/ (18) on the remote control or touch the onscreen play button (>) to resume normal play.

Repeat Playback

Press the RPT button (7) on the remote control or the button on screen to alter repeat mode according to the following:

DVD: Repeat Chapter, Repeat TItle, Repeat Off

VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available if PBC is on.

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (14) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Reset the Loading Mechanism

BACK

1/2 MENU

EQ

BACK

 

AUDIO

 

A-B

 

SUBTITLE

TITLE

2/2 DISP

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.

Press the RPT A-Bbutton (6) on the remote control (or the A-Bbutton on screen) to set the start point (A) of the repeated section.

Press the RPT A-Bbutton again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.

Press the RPT A-Bbutton again to cancel the A-B section setting and stop repeat play.

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (14) on the unit or remote control (35) to reset the loading mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (6) on the front panel or remote control

(8) until “DISC” appears at the bottom of the screen.

Stopping Playback

Touch the stop button ( ) on the screen or press the button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the play/pause button (>) on the screen or press the >/ button on the remote control (18) to suspend or resume disc play.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button (33) on the remote control to activate random playback and play all chapters/tracks in random order. “On” appears on the screen.

Press the >> button (19) on the remote control to play the next random track.

Press the RDM button again to turn random play off.

17

Page 21
Image 21
Jensen VM9313 operation manual DVD/VCD Video Operation