Jet Tools 16-32 Plus operating instructions Introduction Specifications

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a JET Model 16-32 Plus Drum Sander. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications
Stock Number	629004K
Model Number	16-32 Plus
Maximum Sanding Width (in.)	32 (two passes)
Minimum Sanding Length (in.)	2-1/4
Maximum Thickness (in.)	3
Minimum Thickness (in.)	1/32
Overall Dimensions (HxWxD)(in.)	18 x 23 x 32
Drum Dimensions (dia.x L)(in.)	5 x 16
Drum Speed (RPM)	1725
Drum Bearing Diameter (in.)	1
Dust Port Diameter (in.)	4
Conveyor Motor	43-in.-lbs. torque, direct drive, DC
Conveyor Variable Feed Rate (RPM)	0 to 10
Motor	TEFC, 1.5HP, 1Ph, 110V
Net Weight (lbs.)	164

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6