Unpacking
Open boxes and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Drum Sander is assembled and running properly.
Compare the contents of your boxes with the following parts list to make sure all parts are intact. Any missing parts should be reported to your distributor. Read this instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of Boxes
Box #1: (see Figure 2)
1 Drum Head Assembly (A)
1TUFToolTM (B)
1Knob (C)
1Depth Gauge Label (D)
4Hex Washer Head Bolts, 5/16”x3/4” (E)
1Sander Demo Video (F)
1Box of Ready To WrapTM Abrasives (G)
1Instruction Manual (not shown)
1Warranty Card (not shown)
Box #2: (see Figure 3)
1Stand Assembly including: 4 Legs (H)
1 Shelf (J)
2 Long Rails (K)
2 Short Rails (L)
4Leveling Feet (M)
1Bag of Fasteners including:
24Carriage Bolts, 5/16”x5/8” (N)
24Flanged Lock Nuts, 5/16” (O)
8Hex Nuts, 3/8” (P)
8Flat Washers, 3/8” (R) 1 Conveyor Bed (S)
Read and understand the entire contents of this manual before attempting
Figure 2 – (Box #1)
Figure 3 – (Box #2)
8
