Jet Tools GH-1440ZX operating instructions Specifications, Capacities

The following specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

Specifications

Model Number	GH-1440ZX	.............................. GH-1460ZX
Stock Number	321910	..................................... 321920
Capacities:
Swing over Bed (in.)	14	............................................. 14
Swing over Cross Slide (in.)	7-5/8	.........................................7-5/8
Swing Through Gap (in.)	23-5/8	....................................... 23-5/8
Length of Gap (in.)	12-1/4	....................................... 12-1/4
Distance between Centers (in.)	40	............................................. 60
Headstock:
Spindle Bore (in.)	3-1/8	.........................................3-1/8
Spindle Mount	D1-8	......................................... D1-8
Spindle Taper with Sleeve	MT-7(MT-5)	.............................. MT-7(MT-5)
Number of Spindle Speeds	12	............................................. 12
Range of Spindle Speeds (RPM)	42 to 1800	................................ 42 to 1800
Gearbox:
Number of Longitudinal and Cross Feeds	122	........................................... 122
Range of Longitudinal Feeds (in./rev.)	0.0015 to 0.0913	.......................0.0015 to 0.0913
Range of Cross Feeds (in./rev.)	0.0006 to 0.0365	.......................0.0006 to 0.0365
Number of Inch Threads	61	............................................. 61
Range of Inch Threads (in.)	1-5/8 to 72	................................ 1-5/8 to 72
Number of Metric Threads	24	............................................. 24
Range of Metric Threads (mm)	0.05 to 20	................................. 0.05 to 20
Compound and Carriage:
Maximum Tool Size (in.)	1 x 1	......................................... 1 x 1
Maximum Compound Slide Travel (in.)	5-1/8	.........................................5-1/8
Maximum Cross Slide Travel (in.)	9	...............................................9
Carriage Travel (in.)	35	............................................. 55
Tailstock:
Tailstock Spindle Travel (in.)	5	...............................................5
Tailstock Taper	MT-4	.........................................MT-4
Steady Rest Capacity (in.)	1/2 to 3-1/2	............................... 1/2 to 3-1/2
Follow Rest Capacity (in.)	3/8 to 7	..................................... 3/8 to 7
Width of Bed (in.)	13-3/8	....................................... 13-3/8
Overall Dimensions (in.)(LxWxH)	97-1/2 x 40 x 46-7/8	................116-1/2 x 40 x 46-7/8
Motor	7-1/2HP, 3Ph, 230/460V*	..........7-1/2HP, 3Ph, 230/460V*
Approximate Net Weight (lbs.)	5187	......................................... 5380

*pre-wired 230V

6