Unpacking
Open shipping cartons and check that all parts are intact. Report any damage immediately to your distributor. Read the instruction manual thoroughly for assembly, alignment, and maintenance instructions.
Contents of the Shipping Containers
1XACTA Fence II
1Front Rail
1Rear Rail
1Guide Rail
3Black Plastic End Caps
1Hardware Package
1Owner’s Manual
1Warranty Registration Card
The contents of the hardware bag are drawn full scale in Figure 1.
Note 1: Quantities may vary depending upon whether you purchased the short rail or long rail.
Note 2: If the optional wooden extension table is not used, there will be extra hardware.
Tools Required for Assembly & Adjustment
1#3 Cross Point Screwdriver
17/16” Wrench
11/2" Wrench
1Combination Square & Straight Edge
1Electric Drill
11/4”, 3/16” Drill Bits
2
1 1/4”, 3/16” Allen Wrenches
6
