JL Audio SB-POL-RNGR/SYS manual Installation G u i d e, SKU#94425, Estimated Time, Hours, E P

SB-POL-RNGR/SYS INSTR_SKU# 011278

I n s t a l l a t i o n G u i d e

for the

SB-POL-RNGR/SYS

SKU#94425 2004-2008

If you choose to perform the installation yourself, it is absolutely vital that the enclosures be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:

1)The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s).

2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

INSTALLATION D I F F I C U LT Y :

3OUT OF

5

Estimated TIME:

2-3 HOURS

Thank you for choosing a JL Audio Stealthbox® for your all-terrain vehicle. With proper installation,

your new vehicle-specific enclosed speaker system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

S T E P 1

Many of the following steps will be repeated on both sides of the vehicle.

Remove the five screws that secure each of the kick panels.

(see circled areas, there are also two inside)

S T E P 2

The kick panels can be removed by pulling up at the bottom and towards the rear, hinging the panel backwards and out.

S T E P 3

Before test fitting the subwoofer enclosure, make yourself familiar with the location of the threaded insert on the top of the enclosure.

From the passengers side, test fit the subwoofer enclosure into the dash with the raised part of the enclosure going up and, behind the dash cross-dash bar as shown.

Now is a good time to test the performance of the Subwoofer.

Continued on Next Page