START
HERE

Stealthbox®

I N S T A L L A T I O N G U I D E

for the

SB-GM-BURBSCNSL/10W3v2

(2003-Up Chevrolet Suburban,Tahoe,

Silverado &

GMC Yukon,YukonXL, Sierra with front

bucket seats and center console)

Read the instructions completely, before the start of

➔the install.

This Stealthbox Enclosure install does require per- manent modification to the OEM inner console.

➔ ➔

STEP 1: Engage the emergency brake.

Place the key into the ignition and turn to the accessory posi- tion.

The shifter and the steering wheel needs to be positioned all the way down.

Remove the front dash cluster panel, by pulling the dash trim towards you and work around the diameter. Be careful not to damage the four way light push button, located on top of the steering column.

Once the trim is removed. Place the transmission into park, remove the key from the ignition and pop the emergency brake.

STEP 2: Moving down to the top portion of the center console. Pull the upper storage pocket panel out and disconnect the electrical outlets.

This Stealthbox is a product which requires professional installation skills and tools.

Please read this installation guide thoroughly before beginning the project. It will guide you step by step through the installation. Several of the steps in this process may require two people to accomplish.

➔

➔ ➔

It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s) and

2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

Please enjoy your JL Audio Stealthbox responsibly.

STEP 3: Pull the cup holders up and out of the center console.

STEP 4: On the upper lip of the main storage bucket, remove all the screws, including the storage lid’s screws.

STEP 5: To remove the main storage bucket, remove the rubber mat.This will expose the four screws that need to be removed.

Once all these screws have been removed. Remove the storage bucket by lifting up and out of the con- sole.

Continued on Next Page ➔

w w w . j l a u d i o . c o m

SB - GM - BURBCNSL/10W3v2, JL AUDIO, Inc 2005

Pag e 1

Sheet SKU#011167 3/08/2005