JL Audio STEP, STEP, STEP, STEP, STEP, STEP, STEP 44:, STEP 46:, STEP 47:, STEP 6 &, STEP 49:

Cont.

From

Previous

Page

➔➔

STEP 44: The pair of 10mm bolts that where	STEP 45: With the upper storage pocket in hand
removed in STEP 5, need to be replaced.You may	from STEP 4, reconnect the 12v outlets.Then snap
have to reposition the OEM console, to have it line	the upper storage pocket back into place.
up like factory.

➔

➔

STEP 46: Reconnect the rear stereo controls and 12v plug from STEP 22.

Also reconnect the white plug with the lever from

STEP 9.

➔

STEP 47: Replace the rear of the outer cosmetic	STEP 48: Replace the main storage bucket and
console and the four mounting screws from	storage lid from STEP 6 & 7.
STEP 21.

w w w . j l a u d i o . c o m SB - GM - BURBCNSL/10W3v2, JL AUDIO, Inc 2005 Pag e 7

STEP 49: Replace the cup holders from STEP 8.

As long as everything is lining up at this point. Securely tighten the pair of mounting bolts from STEP 20.

You can use undercoating to coat the mounting assembly.This will prevent any type of rusting.

Continued on Next Page ➔

Sheet SKU#011167 3/08/2005