Stand-by mode

Push the machine back into the housing until a „click‰ can be heard. This indicates that the machine is locked in position.

Stand-by mode

Once powered and inserted into the cabinet, the machine is in stand-by mode: this will be signaled by the on/off LED blinking.

Press the start control to switch on the machine: the start LED will be illuminated.

To come back to the stand-by mode, press the start control once again.

Manual backgroundCAUTION:

On start-up, the machine initiates the pre-warming phase for the firs 3 minutes. During this phase the ON/OFF LED will blink quickly and the machine will be not able to execute any operation. Then the LED blinks slowly and the machine is ready to operate.

16

Page 18
Image 18
John Lewis JLBICM 01 instruction manual Stand-by mode