Instructions for the first use
Filling up the water reservoir
•Squeeze together the unlocking levers found under the drip tray
•Gently pull the coffee machine forward from the housing by sliding it along the telescopic runners.
Hardness of water:
•Before filling up the water reservoir, make sure that the decalcifying Brita filter has been soaked in cold water for at least 30 min. Follow the instructions printed on the filter package. After this operation insert the filter into position inside the water reservoir as shown in the figure.
•If the machine will not be used for long periods, empty the water from tank.
•Brita filters are available from most supermarkets and domestic goods outlets, at our
11
