Upper basket spray arm
1.To remove upper basket spray arm, tilt it down hard.
2.Clean spray arms jets.
3.Place cleaned upper basket spray arm back in position against the connecting piece: press the two together firm- ly, until you feel them snap into place.
Bottom spray arm
1.To remove bottom spray arm, pull it upwards out of its catch.
2.Clean spray arm jets.
3.Place bottom spray arm back in position against connecting piece and press down firmly, until you feel it snap into place.
Prolonged periods of non-opera- tion
If you are not using the machine for any period of time you are advised to:
1.Unplug the appliance and then turn off the water.
2.Leave the door ajar to prevent the formation of any un- pleasant smells.
3.Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the tempera- ture is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty
Moving the machine
If you have to move the machine (moving house etc....):
1.Unplug it.
2.Turn the water tap off.
3.Remove the water inlet and discharge hoses.
4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.
26
