John Lewis JLWD1404 Control Panel, Programme selector dial, Spin button, Spin speed

The Control Panel

30 Minute wash

	Spin
	Drain
	Softeners
	Rinse
	Soak 30°
	Cold
Wool
	30°
	40°
	Delicates 30°
	Duvet 40°

1

1 Detergent dispenser drawer

2 Programme selector dial

The programme selector dial is divided into following sections:

•Cottons,

•Synthetics,

•Delicates

• Wool / Hand washing

•Special programmes from “Soak 30°” to “30 Minute wash”

•Reset/Off programme Off

	30 Minute wash	Off	90°
				Cottons
	Drain		60°
	Spin		Economy 60°
	Softeners		Economy 40°
	Rinse		40°
	Soak 30°		30°
Wool	Cold		Drying
	30°		60°
				Synthetics
	40°		Economy 40°
	Delicates 30°		40°
	Duvets 40°		Easy iron 40°
			Drying

The selector dial can be turned either clockwise or anticlockwise to select the required wash and drying programme .

Positions “Economy” correspond to an ENERGY SAVING programme and “Cold” to a cold wash. Before setting the dial to any position ensure that the machine is switched off.

At the end of the programme the selector dial must be turned to position “Off”.

3 “Spin” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washer-dryer or to select position “None”. The relevant light will light up.

						Programme time			Prewash
Off	90°		1400	Extra dry
	60° Cottons		900	Iron dry					Rinse
	Economy 60°		1200	Store dry					Wash
	Economy 40°		700						Rinse hold
	40°		None						Drain
	30°			Extra	Automatic	Time	Delay	Start/	Spin
	Drying		Spin Prewash Quick	rinse	dry	dry	start	Pause	Drying
	60°
		Synthetics							End	JLWD1404
	Economy 40°
	40°
	Easy iron 40°
	Drying

2 3 4 5 6 7 8 910

Spin speed

The following speeds are available for the different fabrics:

•Cottons, linen:

700/900/1200 max 1400 r.p.m.;

•Synthetics and wool:

700 max 900 r.p.m.;

•Duvet 40°/Delicates 30° and “30 Minute wash”: 700 r.p.m.

Position “None”

By selecting the option “None” all the spinning phases are cancelled and the machine will not drain the water of the last rinse, so as not to crease the laundry.

If you select this option with programmes for cotton and synthetics, the machine will perform some extra rinses. To be used for extremely delicate items.

At the end of the cycle, the “Start/Pause” button light will flash, the “Rinse hold” pilot light and the door locked light illuminate and a static zero will appear on the display to indicate that the water must be drained.

To complete the cycle, choose one of the following options:

•Select programme “Drain” and then depress the “Start/Pause” button:

The water is emptied out without spinning.

Attention! Before selecting programme “Drain” the selector dial has to be positioned on Off (cancelling).

•Depress “Start/Pause” button: after emptying, the machine performs the spin cycle corresponding to the type of fabric previously selected.

•Turn the programme selector dial to “Off”, select the programme “Spin”, reduce eventually the spin speed by means of the relevant button and then depress the “Start/Pause” button.

The “None” option cannot be selected for the automatic WASHING & DRYING programme.

6