cycle is very quiet and it can be selected at night or in times with a more economical power rate. On some programmes the rinses will be performed with more water.
If the «Rinse Hold» or «Quiet» option has been selected the «Door lock» light is on, the «Start/Pause» button light goes out and the display shows a flashing «0». The door cannot be opened because the water must be drained. To empty out water read the paragraph «At the end of the programme».
3.3Options: Easy Iron and Extra Rinse symbols, Prewash, Stain, Intensive description. If an option is enabled, the icon or the description is on.
3.4Wash timemessage:
•Duration of washing programme in hours and minutes, after you have selected a programme. While the programme is running (after you have pressed the Start/Pause button), the displayed time value decreases by one unit every minute.
When selecting the «proportional» programmes, the display shows the washing duration of the maximum recommended load. After the «Start/Pause» has been pressed, on the display «Wash time» message starts flashing to indicate that the appliance is calculating the laundry amount and the real duration. During this time, the washing duration shown decreases. When the calculating phase has finished, the «Wash time» stops flashing. The washing time is adjusted to the real load.
•Delay start, a time value indicated in hours and minutes and selected by pressing the delay start button. The delay time (20 hours max) is displayed for a few seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last hour, every minute.
•An alarm code indicates a fault with the machine (see the relevant chapter).
•An incorrect option selection has been made: this is indicated by the message Err for a few seconds when an option incompatible with the current programme is selected.
•The washing machine has completed the programme: this is indicated by a flashing zero. The «Door lock» pilot light and the Start/Pause light go out and the door can be opened.
•The washing machine has stopped with water in the tub, at the end of the «Soak» or of a programme with the «Rinse hold» or «Quiet» option: this is indicated by a flashing zero. The «Start/ Pause» light goes out but the «Door lock» pilot light is still on. The door cannot be opened.
3.5Quick option. If enabled, the description is on.
3.6.Delay Start: the description is on if the Delay start is set.
3.7.Child lock symbol.
11
